Hi Folks,
I have a 1968 Globetrotter with a DuoTherm Furnace Model# G6103GA-7, a 16,000 BTU. I need to get a nice replacement unit with a thermostat that will line up OK with my side exhaust. Any ideas?
Thanks,
Randy
Methinks that the original furnace was a Nt22 or so from Suburban and a PO replaced it with the Duotherm Model. I replaced the original furnace in my 72 TW with a Suburban NT30SP. Lots of threads on that. I'm sure someone with more knowledge on your model will chime in on that.
__________________
Click on the link to see a picture of the Sioux River falls near my home. https://visitsiouxfalls.com/assets/i...uxfalls-og.jpg
Eastern South Dakota is very pretty with hills, rivers, and trees.
Oh, okay! Thanks! I'm not gonna be much help. I'd have a fake door made and put a Suburban vent through that. I've seen patches with vents that sorta looked like patches with vents.
Good luck! :-)
__________________
Click on the link to see a picture of the Sioux River falls near my home. https://visitsiouxfalls.com/assets/i...uxfalls-og.jpg
Eastern South Dakota is very pretty with hills, rivers, and trees.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.