Tidee Products Plugs in aisle?

[Chaplain Kent]

As we all know one project leads to another. While working on the ongoing heat problem I discovered that the vents were not aigned properly thus no heat could enter the passenger side when the vent was opened! The heat was directed towards the floor on the wrong side of the fire wall. I needed to tear back some carpet and found mildew which lead to all the carpet being removed. In the process I uncovered two plates in the center aisle labeled: "Tidee Products." These plates have a hole in the center fitted with a wooden plug. Are thses for the central vacuumn system which was never installed in my coach or do they serve another purpose?
Thanks

[ALANSD]

these are plugs for the extra dinette table attachments.
I have two in my floor, and when I put in the tables they "hook up" with the main fold out table to become a t shape. These are replaceable. We had a thread sometime ago where there was a link to the table pole legs that fit theses holes. The tables are easily made.

[ALANSD]

here is the new table I made, the smaller ones are still the original oak look laminate.

[Chaplain Kent]

Thanks for the information. I carpeted over the plugs but did not take out the plates which was my first intention. I will be building a new dinette upon our return from Florida and will not be using the fold out table any longer.
After I get the coach cleaned I will post pictures of our remodel including the new oak console and doghouse.

[alfalsetto]

Hay Chaplain Kent, I like to see to photos of the doghouse after you get done. I going to do My in Oak to just as sone as I get My cummins in the My 82

[Chaplain Kent]

I posted a picture under the thread "classic console" in General motorhome section. There are also several other console pictures from other more accomplished craftspeople.