|
|
08-26-2013, 10:18 AM
|
#41
|
Rivet Master
1956 22' Safari
2015 27' Flying Cloud
Vintage Kin Owner
Conifer/Evergreen
, Colorado
Join Date: Feb 2002
Posts: 12,702
|
Quote:
Originally Posted by 61bambi472
just noticed i messed up on my user name should of been 62
|
If you want, you can change it to 62 my contacting a Moderator or Admin via PM...
Shari
|
|
|
08-26-2013, 01:18 PM
|
#42
|
2 Rivet Member
1964 26' Overlander
longmont
, Colorado
Join Date: Sep 2007
Posts: 54
|
oldest Bambi
Well I just found out that my 61 Bambi needs a new axle and that the earlier ones had the axle welded to the frame...SO I have to cut it off and fabricate a new mounting plate for a new axle. Also interested to find out if my inner upper shell ends are made of aluminum or fiberglass. Rear bumper is basic angle iron type that is part of frame extension.
|
|
|
08-27-2013, 01:39 PM
|
#43
|
Silver Lamb
1969 27' Overlander
1961 16' Bambi
Bonner Springs
, Kansas
Join Date: Apr 2007
Posts: 55
|
1631 has fiberglass upper shell ends. We don't know when CA started doing that
or when they stopped. No rivets showing there.
The new axle will certainly set the trailer higher. We are still dealing with the
proper steps for use at the door.
|
|
|
08-28-2013, 08:59 AM
|
#44
|
2 Rivet Member
1964 26' Overlander
longmont
, Colorado
Join Date: Sep 2007
Posts: 54
|
1601 too
My Ca Bambi, 1601, also has the fiberglass shell on upper ends. Are there any that do not? Was it an Ohio thing for Aluminum?
|
|
|
08-28-2013, 05:27 PM
|
#45
|
billnovus1
1961 16' Bambi
Salinas
, California
Join Date: Jul 2010
Posts: 15
|
Hi Ewemama, thanks for asking. I gave up on getting the "Blinding Shine" look. Just too much time. I made it through the 1st couple steps (many weekends and $200 in polish, couple Harbor Freight polishers to boot) and decided it looks good enough for me and I still get lots of compliments, plus too many people knocking on my door at home wanting to know if it's 4sale. Many people try to play you, "hey you want to sell that old trailer"? I know some of them know exactly what it is. Had people offer 10 grand "right now". We Bambi owners are a lucky bunch and envied by all!
All I've really done is replace some floor rot so I could install a new toilet along with plumbing for the dump and all. Reupholstered everything and have been using it. Decided I didn't want to get too anal , just use it. Made a couple trips to Trinity Mts in N.Cal (1000 mile RT and heading to Big Sur Next week for a couple days. Kinda of lucky living 1/2 from the coast. We pull it over to the beach and enjoy it for the day.
It really pulls nice behind a older Yukon but may think about changing the axel and wheel size in the future. Original axel worries me a little and everybody encourages doing it. I pull and grease the bearings before every use just to be on the safe side.
Nice hearing from you and great to see some postings about the Bambis.
As far as the ser.# people are concerned with, read Andy's explanation. He lays it out there with the correct info.
|
|
|
08-29-2013, 12:03 PM
|
#46
|
2 Rivet Member
1964 26' Overlander
longmont
, Colorado
Join Date: Sep 2007
Posts: 54
|
new axle
I too am replacing my axle which requires 5 stud wheels and tires and not my 14" 4 studs...so have been told to go back to 13" wheels for the look. 14"s do not seem too bad and want the best tires, so are 13" tires just as good as 14"? want radials so I assume white walls are out. Know all about the need for trailer specific tires and not auto tires...just a size dilemma...
|
|
|
08-29-2013, 12:07 PM
|
#47
|
2 Rivet Member
1964 26' Overlander
longmont
, Colorado
Join Date: Sep 2007
Posts: 54
|
toilet seat issues
|
|
|
08-30-2013, 04:31 PM
|
#48
|
2 Rivet Member
1961 16' Bambi
1969 27' Overlander
Bonner Springs
, Kansas
Join Date: Aug 2006
Posts: 34
|
BFK,
I re palced the floor our '61 it is quite a task. There was no inspection panel on the Babmi. I was lead to believe that one existed, wrong. The pig tail comes right up through the frame center left and just right of the a-frame. It was protected by cardboard tube.
The previous owner had installed a cable connection near the shore pwr connection and a round TV antenna on the roof. All of the cables came through the right upper cabnet.
|
|
|
08-30-2013, 04:53 PM
|
#49
|
2 Rivet Member
1961 16' Bambi
1969 27' Overlander
Bonner Springs
, Kansas
Join Date: Aug 2006
Posts: 34
|
When I re wired the pigtail, I did allow for an inspection plate however, it is located behind the new fresh water tank, hope I never need to go there.
One other thought about the door handles, lubricate lubricate lubricate. I am still useing the original door handle and lock.
This is the other half of EWEMAMA
|
|
|
08-31-2013, 03:55 AM
|
#50
|
1 Rivet Member
1961 16' Bambi
alstonville
, nsw
Join Date: Jun 2013
Posts: 6
|
Gday guys , just letting you know that BAMBI 1961 serial 161T103 is going fine , with lots of love and detail ,in excellent condition but now calls AUSTRALIA home . Hope to load some aussie photos soon . OHIO to AUSTRALIA now thats a getting out and about ( WALK ABOUT )
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|