Visit our Popular Forums

PeterH-350LE · 02-17-2016, 05:54 PM

Quote:

Originally Posted by bkahler

......

That's a nice looking project trailer. Is it one of those projects where you buy low and sell high or is it going to be like my projects where you buy high and sell low?

Stocks is the only thing I buy high and sell low

This trailer will be a keeper for while, needs some work but I love the more recent features, like padded ceiling and no cracking end and front caps.

Quote:

Originally Posted by bkahler

When are you going to take on a Argosy or Classic project (other than your 310)?

The same day Martin buys his 345

Don't really care for vintage trailers, just too much work and floors are always a big issue.

PeterH-350LE · 02-17-2016, 05:56 PM

Quote:

Originally Posted by bkahler

Well whadda ya know...right in Peter's neck of the woods

7 hours...

streamquest · 02-17-2016, 10:01 PM

Peter,

Mine arrived this afternoon!!!! I won't get around to installing them for a while yet, but it will be in conjunction with some new tires once the weather breaks.

Once again…. THANKS for all of the energy and determination that it took to make this happen.

Charly

bkahler · 02-18-2016, 04:52 AM

Quote:

Originally Posted by PeterH-Airstreamer

7 hours...

For Texas that's just a hop skip and a jump away

martin300662 · 02-18-2016, 07:05 AM

Quote:

Originally Posted by PeterH-Airstreamer

Stocks is the only thing I buy high and sell low

This trailer will be a keeper for while, needs some work but I love the more recent features, like padded ceiling and no cracking end and front caps.

The same day Martin buys his 345

Don't really care for vintage trailers, just too much work and floors are always a big issue.

Too long/too many axles. Now if they made a sub-28ft diesel pusher that maybe tempting

According to Fred's website they made one at 27ft but 'ruined' it by putting the bath-room in the back!

chiefair · 02-18-2016, 10:11 AM

Mine arrived. I may brave the cold and install them this weekend. I guess now I have to spring for a pair for the rear also. Thanks for your persistence in making this happen.

Keith

ww4nc · 02-18-2016, 08:21 PM

Peter,

Centramatics were waiting by the door when we got home from a trip.

Thanks again for all your effort and time.

We all appreciate it a lot.

Best to you and your gang.

Dick

Isuzusweet · 02-21-2016, 10:09 AM

Just curious to see if anyone is thinking of giving these a paint job first to ward off corrosion.

John figures a good coat of brake caliper paint should do the trick. Poweder coating was deemed too thick.

http://duplicolor.com/product/caliper-paint

Cheers
Tony

bkahler · 02-21-2016, 05:44 PM

Quote:

Originally Posted by Isuzusweet

Just curious to see if anyone is thinking of giving these a paint job first to ward off corrosion.

John figures a good coat of brake caliper paint should do the trick. Poweder coating was deemed too thick.

http://duplicolor.com/product/caliper-paint

Cheers
Tony

Tony, I can't answer your question about paint but I'd be leery of powder coating the balancers due to the heat involved in the powder coating process.

Brad

PeterH-350LE · 02-21-2016, 06:22 PM

Quote:

Originally Posted by Isuzusweet

Just curious to see if anyone is thinking of giving these a paint job first to ward off corrosion.

John figures a good coat of brake caliper paint should do the trick. Poweder coating was deemed too thick.

http://duplicolor.com/product/caliper-paint

Cheers
Tony

I think you would void the warranty.

Isuzusweet · 02-21-2016, 07:37 PM

Paint it is. I hadn't thought of the heat issue as it's going to get pretty hot where they are going to be anyway.

Cheers
Tony

Malmills · 02-22-2016, 08:10 AM

Hi Peter,

I was away and my two packages were pulled into the living room by my mom. I haven't opened them yet but I assume the large contains the two set for the rear. Thanks again for your efforts. I'll be emailing you soon.
Malcolm

gloran · 02-24-2016, 06:41 PM

I installed mine last weekend. I couldn't find anything in the instructions on the rear installation of the dish between the two rims. If you are suppose to install the bead tube towards the outside tire or towards the inside tire. I couldn't see how it would make a difference either way in changing the performance of it balancing, so I called the company and was told they can be installed either way. You would think they would mention that somewhere, or if they did I didn't find it. Maybe if somebody else has the same question this will help.

PeterH-350LE · 02-28-2016, 06:07 AM

I still have a set for the P-30 front someone cancelled after I ordered them.
Please PM me if you are interested. This may be your last chance to get a set, since I will not do this again.

Roquefort · 03-02-2016, 01:12 PM

Hey Peter,
let me ask my 325 buddy here, he spent s lot in his rig! I am sure, he might be interested!!!
I'll text you later.
Thank you so much for all your efforts!

cactusjk · 03-15-2016, 08:43 PM

I am going with a set for our 2015 FC 23D. I figured that I would just order from Centramatics. They sound like they are just galvanized vice painted. We are in CA so I don't see that as a problem. Not sure if there are any other painted options out there?

ww4nc · 06-19-2017, 05:44 PM

Quote:

Originally Posted by PeterH-Airstreamer

I still have a set for the P-30 front someone cancelled after I ordered them.
Please PM me if you are interested. This may be your last chance to get a set, since I will not do this again.

Peter
I got a set of P30 centramatics from u earlier

They work great

I just acquired a second 86 345 so could use a second set if u still have them

Dick
ww4nc@arrl.net

PeterH-350LE · 06-19-2017, 06:08 PM

Quote:

Originally Posted by ww4nc

Peter
I got a set of P30 centramatics from u earlier

They work great

I just acquired a second 86 345 so could use a second set if u still have them

Dick
ww4nc@arrl.net

pm sent