|
|
04-13-2013, 09:09 PM
|
#41
|
Rivet Master
1966 24' Tradewind
1995 34' Excella
Lynchburg
, Virginia
Join Date: Jun 2006
Posts: 4,226
|
Quote:
Originally Posted by RM66caravel
Thanks Dan I will take all of the input I can get I will check out their website what type of load do you have? With the caravel I am planning to replace the lights with LEDs and add a led tv/DVD combo. Move the ac forward and install a fantastic vent. Gotta have a vent cuz I do not want Jeannie to throw me out to do the bear in the woods thing.
|
RM
I really don't know my electrical load. It was one of the first improvements I made when I got the Tradewind. I have since gone to two 6v golf cart batteries, LED lights and removed the Armstrong AC unit in favor of a small 5k window unit (when needed). The 45 amp size seems to work fine for me. I suppose larger would charge up faster, but whats the hurry.
I have changed all my interior lights to LED and still use the original light fixtures. You can see how I did this if you look at posts 37-40 of the thread titled "To LED or not to LED":
http://www.airforums.com/forums/f447...d-79632-3.html
If you are interested in looking at my window AC thread go here:
http://www.airforums.com/forums/f427...nny-91215.html
Dan
|
|
|
04-14-2013, 09:12 AM
|
#42
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
I need help!!
No not the therapy type yet. I have removed ALL of the screws disconnected the gas line and removed all of the tape! So how the heck do you get the heater to let loose?? I wiggled I giggled cussed and even sat the wife for help and it still will not budge when I get up from my nappy (work tonight).
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-15-2013, 05:44 PM
|
#43
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Okay help no longer required saws all and tin snips took care of the rust weld I could not reach. Used aluminum tape to cover the exhaust hole and will be replacing that panel anyway due to multiple poorly applied patches. Heater and pipe to heater good extension ato outside vent slightly damaged. Will not be reinstalling the heater. Next road side to bath. Bath is last out. Colin said that build start date on axle is 4-23. Lots to do in the mean time.
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-16-2013, 03:50 PM
|
#44
|
2 Rivet Member
1967 17' Caravel
sonora
, California
Join Date: Feb 2008
Posts: 24
|
Re: Refrigerator vent repair...I had the same issue on my '66 Caravel; mixed up some of that 2-part epoxy (in red and black tubes) and applied as smooth as possible. When it set I spray painted the entire vent (still in place) with that Krylon spray paint made just for plastic. Looks great after eight years...
|
|
|
04-16-2013, 07:04 PM
|
#45
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Thanks I am planning to try the fiber glass because I will be removing the inner shell to repair leaks and replace the insulation and wiring. Should be a learning thing.
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-16-2013, 07:06 PM
|
#46
|
Moderator
1968 17' Caravel
Battle Ground
, Washington
Join Date: Dec 2002
Posts: 12,255
|
Quote:
Originally Posted by sierratony
Re: Refrigerator vent repair...I had the same issue on my '66 Caravel; mixed up some of that 2-part epoxy (in red and black tubes) and applied as smooth as possible. When it set I spray painted the entire vent (still in place) with that Krylon spray paint made just for plastic. Looks great after eight years...
|
Sounds good! I have the same problem, and it's slowly gotten worse. This might be the year to finally give it a shot. Thanks for sharing your technique!
__________________
Stephanie
|
|
|
04-19-2013, 03:35 AM
|
#47
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Okay it is my weekend and yes it is raining! So I will do some work inside and take and post pictures! I am breaking out the drimmel today and cutting the rusted stripped out anger inducing 2 inch screws! Running out of space in the garage for the airstream parts so gotta make the sacrifice and get rid of some more old non used stuff! Just gotta figure out weather it should be Jeannies or the grandchildrens stuff!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-19-2013, 06:15 AM
|
#48
|
3 Rivet Member
1971 18' Caravel
Columbus
, Montana
Join Date: Apr 2003
Posts: 103
|
OMG that's so funny. I was thinking you were gonna get rid of some AS stuff (just my first thought).
|
|
|
04-19-2013, 08:59 AM
|
#49
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
We will be replacing the oven with a 3 burner cook top and a microwave. Jeannie said we are holding the oven for the time being! Since she is the brains of the outfit I will do anything she suggest cuz 99% of the time she is right!! Gotta love a smart woman!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-19-2013, 09:01 AM
|
#50
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Val went to vintage-airstreams.com and they had some decent trailers there too!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-19-2013, 01:12 PM
|
#51
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Okay screws don't care bout drimmels so it is right to the pry bar! Time to back away for a few minutes and regroup!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-19-2013, 02:01 PM
|
#52
|
Moderator
1968 17' Caravel
Battle Ground
, Washington
Join Date: Dec 2002
Posts: 12,255
|
We've never regretted keeping the oven. We've actually used it quite a bit while camping unplugged.
__________________
Stephanie
|
|
|
04-19-2013, 02:32 PM
|
#53
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Since my cooking skills are limited to hotdogs steak burgers and Mac and cheese and Jeannie is not baking anything on vacation then no need for the oven! If we will be going Long haul then I am taking the generator! I can microwave!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-19-2013, 03:14 PM
|
#54
|
Moderator
1968 17' Caravel
Battle Ground
, Washington
Join Date: Dec 2002
Posts: 12,255
|
Microwaves are cheating
__________________
Stephanie
|
|
|
04-19-2013, 05:39 PM
|
#55
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
As long as it taste good you may be the winner of the airstream cook off. When I am hungry I eat and hungry enough strang things taste good!
Cliff
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-20-2013, 06:42 PM
|
#56
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
pictures
More pictures and some questions.
1. po shortened shelf using screws duct tape and a SAW. current plans are to remove the remaining part and fiberglass patch over the mod then put a wooden shelf on it.
2. I thought I knew what a wire nut was but now I know there are 2 and only one is used on wiring the other tried to modify the wiring!
Hopefully the pictures only post once the user is challenged and I still have to empty the water tank and clean up the 40 year old canned ham!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-23-2013, 02:42 PM
|
#57
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
The axle has arrived! Yeah
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-24-2013, 05:51 PM
|
#58
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
A little more progress
Today I accomplished a little more with the removal of the toilet and 2 walls and would have done more but I ran out of time! gonna replace the wire ridden spider web also! Soon we will be removing revits and insulation!! Lots to do!
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-24-2013, 06:11 PM
|
#59
|
Rivet Master
1966 17' Caravel
Newport
, North Carolina
Join Date: Jan 2013
Posts: 1,291
|
Any body have a suggestion for the univolt replacement and a source?
__________________
Gotta get busy! Have a great day! Now where did I put those revits?
|
|
|
04-24-2013, 08:56 PM
|
#60
|
Rivet Master
Commercial Member
1957 30' Sovereign of the Road
1959 28' Ambassador
1949 24' Limited
Peru
, New York
Join Date: Sep 2004
Posts: 745
|
Quote:
Originally Posted by RM66caravel
Any body have a suggestion for the univolt replacement and a source?
|
Intellipower, Vintage Trailer Supply dot com
Colin
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|