|
|
06-16-2017, 08:15 PM
|
#21
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Big score
I always watch Craigslist....today was a good day. I bought new 2 custom single mattresses that are $1000.00. Never used for $300. Exactly what I was wanting. It's great to find things way b4 you need them 😎
|
|
|
06-20-2017, 07:39 PM
|
#22
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Do you see it...
Well the layout of bath and bed's is now finalized. Now I can order the grey and black water tanks.
|
|
|
06-25-2017, 08:40 AM
|
#23
|
4 Rivet Member
1962 22' Safari
1973 25' Tradewind
1968 30' Sovereign
Salt Lake City
, Utah
Join Date: Apr 2007
Posts: 264
|
Good stuff! Keep it coming.
|
|
|
06-28-2017, 07:20 AM
|
#24
|
4 Rivet Member
1972 25' Tradewind
Calgary
, Alberta
Join Date: Jul 2015
Posts: 297
|
Nice work, frame and sub floor looks good.
|
|
|
06-28-2017, 10:00 AM
|
#25
|
Registered User
1957 22' Custom
Lago Vista
, Texas
Join Date: Apr 2016
Posts: 371
|
Black Tank
Hey Islandtrader, here's a link to the tank I used for black. Since the tank isn't sloped, and since it's only 4" deep, I installed a 1/2" fitting on the side of the tank to connect fresh water to flush it. I aimed the port directly at the toilet fitting in case the solids want to pile up under the toilet. The port is connected to a readily accessible valve next to the water heater, and it can be easily flushed any time. I tested it yesterday and I think it's going to work well. Here's the link:
https://www.tank-mart.com/rv-marine-...-tank-783.html
|
|
|
07-10-2017, 05:20 PM
|
#26
|
Registered User
1957 22' Custom
Lago Vista
, Texas
Join Date: Apr 2016
Posts: 371
|
Link to the escape hatch handles and catches
Hey islandtrader,
Here's a link to the Hehr handles and catches for the escape hatch on VTS
http://www.vintagetrailersupply.com/...-p/vts-322.htm
|
|
|
09-13-2017, 08:25 AM
|
#27
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Dodged the Bullet!
Living in southwest florida and on a barrier island at times it can be perilous. We normally leave in August and come back early October. This is the best time to see the rest of the U.S. when our weather sucks. We always button up the house for hurricane season. Not to bore anyone with the facts, but we were only 50 miles from the eye, and were in the bullseye until it turned and hit Marco.
The Airstream was tied down but this picture should tell you something.
|
|
|
09-13-2017, 12:54 PM
|
#28
|
Rivet Master
1971 21' Globetrotter
Currently Looking...
Currently Looking...
Currently Looking...
Arvada
, Colorado
Join Date: May 2006
Posts: 3,530
|
Any damage or just moved over a bit.
|
|
|
09-13-2017, 02:16 PM
|
#29
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Quote:
Originally Posted by Aerowood
Any damage or just moved over a bit.
|
Just moved over a wee bit...a friend of mine just pushed back to the original position. As you can see it could not go any farther and would not of fell off the frame as the chain hoist was holding it from the top.
|
|
|
09-13-2017, 07:09 PM
|
#30
|
Registered User
1957 22' Custom
Lago Vista
, Texas
Join Date: Apr 2016
Posts: 371
|
Wowwwwww
Seems like you did indeed dodge a bullet
|
|
|
10-17-2017, 06:17 AM
|
#31
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Quote:
Originally Posted by islandtrader
Living in southwest florida and on a barrier island at times it can be perilous. We normally leave in August and come back early October. This is the best time to see the rest of the U.S. when our weather sucks. We always button up the house for hurricane season. Not to bore anyone with the facts, but we were only 50 miles from the eye, and were in the bullseye until it turned and hit Marco.
The Airstream was tied down but this picture should tell you something.
Attachment 294752
|
Now that I am back home I had a chance to look at the Airstream and assess any damage. None to speak off. However what is really interesting is how the wind of the hurricane does change direction once it passes over your area.
The picture above shows the shell being blown to the east...meaning wind off the gulf...Now picture number two shows some minor damage to the eye brow on the west side of the trailer. Meaning the trailer was first blown west, then east. Oh well I'm really happy that this was the extent of the damage.
|
|
|
10-23-2017, 06:36 PM
|
#32
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Done...
Well I think I am completely done taking everything off the A/S...with the exception of an eyebrow or two. Now hopefully the “more” fun will start by doing construction 🔨 instead of de-construction I wonder if bucking all those rivits in will get as boring as taking them out.LOL
|
|
|
11-11-2017, 06:22 AM
|
#33
|
Registered User
1957 22' Custom
Lago Vista
, Texas
Join Date: Apr 2016
Posts: 371
|
Tanks
Hey islantrader,
I realized last night that I told you something a little different than what I ended up doing with my tanks. I have three waste tanks, two grays tied together in the frame with a black tank in the middle of them. Originally, the aft gray tank was going to handle the shower and the sink, but I decided to rearrange my bathroom and now the aft tank only handles the shower (the pic omits the fore gray tank), and the fore gray tank will handle the kitchen sink and the lavatory. The key to making it all work was to raise the bathroom floor 3" over the frame.
|
|
|
11-12-2017, 09:12 AM
|
#34
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Quote:
Originally Posted by DDickey
Hey islantrader,
I realized last night that I told you something a little different than what I ended up doing with my tanks. I have three waste tanks, two grays tied together in the frame with a black tank in the middle of them. Originally, the aft gray tank was going to handle the shower and the sink, but I decided to rearrange my bathroom and now the aft tank only handles the shower (the pic omits the fore gray tank), and the fore gray tank will handle the kitchen sink and the lavatory. The key to making it all work was to raise the bathroom floor 3" over the frame.
|
Thanks...this is what I am doing, a little like yours, but in different configurations
|
|
|
11-15-2017, 08:12 PM
|
#35
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Fabrication and repair
|
|
|
11-27-2017, 10:03 AM
|
#36
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
I wonder why?
|
|
|
12-09-2017, 07:43 AM
|
#37
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Low Rider !
Today was the day to pull the frame out from under the AS. My tanks (grey and black)came in, so now it is off to the welder to have him put in some brackets to hold them and also do a few other things that I did not notice the last time I took it there.
I am lucky that I can lift the AS on and off by myself, and that really has been great especially trying to get everything to fit. Now with the body on rollers, it will be easy to work on the top and start chasing down leaks...
I love this slammed look....goes back to my hot rod days....
The golf cart makes pulling the frame easy.
The two grey tanks in position.
|
|
|
01-04-2018, 05:21 AM
|
#38
|
4 Rivet Member
1956 22' Safari
1962 28' Ambassador
Williston
, Vermont
Join Date: Sep 2017
Posts: 494
|
Lifting the Shell
Thanks for taking the time to make these posts. I am about seven months behind you in restoring my 1956 Safari. Unlike you I live in Vermont were it is now 15 degrees, up from -10F a couple of days ago. Prior to the cold weather we got our trailer stripped and the floor removed. This coming spring we will be separating it from the frame because I have exactly the same frame problems you did.
A couple of questions about your lifting mechanism:
1. On early photos you appeared to have tied the two sides of the trailer together with 2x4"'s ? screwed into the ribs? There seemed to be a bunch of them with some upward angled braces as well. In later photos they seem to be gone, not needed?
2. One one picture it looks like you are pulling against a 5/4" x 6" x 12'? board against the roof with your chain hoist. I am assuming that was through the center vent panel?
When we get these trailers done we should make a swap. You come up here in the summer and we'll visit you in the winter.
Thanks,
Mark
|
|
|
01-05-2018, 07:45 AM
|
#39
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
Quote:
Originally Posted by steinVT
A couple of questions about your lifting mechanism:
1. On early photos you appeared to have tied the two sides of the trailer together with 2x4"'s ? screwed into the ribs? There seemed to be a bunch of them with some upward angled braces as well. In later photos they seem to be gone, not needed?
2. One one picture it looks like you are pulling against a 5/4" x 6" x 12'? board against the roof with your chain hoist. I am assuming that was through the center vent panel?
When we get these trailers done we should make a swap. You come up here in the summer and we'll visit you in the winter.
Thanks,
Mark
|
Thanks,
#1...you are correct, after crawling around I saw that I only needed 2. I screwed the 2x4 into the ribs flush to where the floor would be. That way every time I need to check the fit they will not get in the way.
#2...Yes pulling through the center...I was lucky to have the beam...with a chain hoist I can raise and lower anytime and check the fit...
#3...anything is possible...
|
|
|
01-07-2018, 08:40 AM
|
#40
|
Rivet Master
1956 22' Caravanner
Don Pedro Island
, Florida
Join Date: Apr 2013
Posts: 613
|
New Wheel Wells
For the life of me I can not understand why AS in building an all Aluminum trailer put in galvanized wheel wells. Mine were shot...one from rusting out and the other from a blow out.
I found a HVAC shop that made some up for me. I had them done in Aluminum. The shop used what they build pans out of here in florida in the salt air on the gulf. It is heavier than the outside skins by a gauge or 2. Plus they are coated to keep them from corroding. I actually put paint stripper on the coating and it did not come off. So I think these will last for some time...
Blow out...
Old and New
New
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|