|
|
05-02-2011, 03:26 PM
|
#1
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
'59 Pacer Shell-On Renovation
Before I get too far, somebody correct me if this is not the right place to start the build thread for our new family member, a 1959 Ohio 18' Pacer
This was my previous introduction if you want to read from the beginning, however to preface with our background, my girlfriend and I are two process engineers living in Redondo Beach, CA (LA area) and are very avid hikers, backpackers, campers, kayakers, sailors, and general adventurers. 2 years ago I started on my goal to see all 58 National Parks. So far I am at 13 out of 58, and the thing is, we don't "visit" them just to knock them off of the list like many people unfortuantely do. We generally hike at least the top 10 trails in the park, and anything less than 10 miles round trip before considering it complete.
Anyway, you can start to see how the idea of an Airstream appealed to us. While we backpack with no concerns over repacking our gear and moving, we are really minimalist backpackers. Car camping is another story altogether and we have been slowly turning into car glampers. Well, we decided to take the leap and upgrade a lot farther.
I laid that all out so that you know our goals are to have an upgrading camping experience, often boondocking to an extent, but generally with at least pit toilets. This means we have decided to not do a toilet to save the space in our 15' interior for storage. However, we both love to cook and will be putting in a very functional and nice kitchen, with fridge, stove top, large sink, and water hater. An LP heater will also be mandatory for the cold desert trips in the winter. The rear of the trailer will have a dedicated bed area, and the front will have a curved gaucho. The one truly glamping accessory will be a large LCD TV w/ DVD player. A google Sketch-up will be shared at a later stage to get some input. We have a long way to go before that.
Here's the pictures of where we started when we received her from the seller on 4/1/2011:
|
|
|
05-02-2011, 03:55 PM
|
#2
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
A little stripping on the side...
I know this post is back-to-back with the intro, which is a thread faux-pas, but I wanted to keep our start separate from the updates.
The weekend we got it, while it was still parked outside our apartment, we spent the evening and following morning removing all the interior woodwork that didn't have water damage (and possibly animals eating away at it from the scratch/tooth marks), as well as removing and saving every single metal fastener and thingamajig on the interior. The only things left are the black tank and freshwater tank, which are proving difficult to extract without using the recip saw or cutoff wheel.
After that I moved it to the storage yard where we will be keeping it ~15 minutes away, and bought all the safety and security gear that I would need for the short term. This included switching out the lock core on the Bargman L77 handle and installing a lock cylinder on the rear compartment. I also greased all the hinges, handles, and locks up so that we could actually use them without excessive force.
Since then, I have been busy applying to business schools and finishing up on as many of the other projects I was doing before we bought the trailer. The apps were due last week and we have since started full force on our big project. I tested an area with stripper as you can see in the pictures, and the Zolatone came off easier than I expected considering the many discussions that I have read here about it. Another post will come soon with our work on the aluminum interior.
|
|
|
05-03-2011, 12:08 PM
|
#3
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
The real stripping begins ;)
One of the purposes of us going this far back in age for our trailer was to get the aluminum interior, and we knew the Zolatone would be a pain. This previous weekend we experimented with various methods of stripping the interior paint as per the endless libraries of posts here regarding the topic. The rear has one layer of paint on top of the Zolatone, and the front has approximately 3 layers, plus the Zolatone. One of those layers is also closer to a mortar than a paint. I'm not really sure what they were trying to do, but they gave up after the first 6 feet thankfully. Also, they literally gave up mid-brush stroke.
I love Aircraft Paint Remover and have used it before on projects. Now that I found the "low odor" version at PepBoys I bought two gallons and we haven't smelled a thing. We got a system down, with me brushing it on to a section, keeping it wet while starting the next, then coming back after 30 minutes to an hour later to scrape it off with a plastic scraper. Then the SO follows up with a smaller blade plastic scraper and 0000 steel wool to bring it to spotless aluminum finish. After 6 hours spread over the last three days, we have done about 25%, but that also included many failed ideas along the way, and we will be much more efficient now with our system down pat.
Our one "discovery" so far has been something that I'm surprised I overlooked initially. I guess I was too caught up with the mechanical condition of the trailer, frame, and running gear that I missed this major detail. While I had paid attention to the fact that the interior front endcap was a multi-coated aluminum, I never noticed that the rear didn't have any seams. And is actually fiberglass. Despite being a 1959 which is part of the "transition period" it seems, I saw the front aluminum interior endcap and didn't even think to question the rear one. I've even read threads about people who only had one, but oh well. We would have still bought it regardless. As others have mentioned, these Pacer models really did have a lot of weird quirks about them. Anyway, we are now brainstorming on what to cover it with. Always trying to look on the positive side, at least we don't have to strip that whole section!!!
The pictures show how the 4 layers of paint come off one to two layers at a time making the aluminum show up first in different places. It also shows the two-stage process where the mottled light-white panels are what I leave it in, and the plain aluminum is where the SO gets it to after me. The last picture shows a few of the panels we've already stripped, and the endcap that we don't have to.
|
|
|
05-04-2011, 08:52 PM
|
#4
|
Registered User
2019 27' Globetrotter
1957 16' Bubble
1957 22' Flying Cloud
Hillsboro
, Oregon
Join Date: May 2008
Posts: 426
|
Hi there - I remember your first post....told a good friend of mine about your Pacer because she just bought one about a week after I purchased BubbleLicious
You're scaring me with the interior paint stripping!!! I want all aluminimum as well but, after stripping & polishing our '69 Tradewind I'm so over that whole stripping grossness!!!
Can't wait to watch your progress!
Mona
|
|
|
05-04-2011, 11:13 PM
|
#5
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Quote:
Originally Posted by monah
You're scaring me with the interior paint stripping!!! I want all aluminimum as well but, after stripping & polishing our '69 Tradewind I'm so over that whole stripping grossness!!!
|
Oh it's so worth it though! Every time my arm starts getting tired from scraping everything off, I pause and admire how far we've come in only a few hours and I get reinvigorated to do another panel. Of course we haven't started the upper curve panels, and I'm planning to do everything except the ceiling.
How much did you polish the interior and would you do more or less polish on this one? I still haven't decided how far to go with it (and by "I" i mean the SO, since she makes those calls...)
|
|
|
05-10-2011, 07:18 AM
|
#6
|
Rivet Master
Commercial Member
1954 22' Safari
Deerfield
, Illinois
Join Date: May 2003
Posts: 1,419
|
Nice work so far - the "after" shot of the stripped panels looks great! Looks like you landed on an efficient process.
__________________
Brad
|
|
|
05-10-2011, 11:59 PM
|
#7
|
1 Rivet Member
1967 20' Globetrotter
Manhattan Beach
, California
Join Date: May 2011
Posts: 19
|
Hi Neighbor!
I'm in Manhattan Beach! I've been wanting an Airstream forever and decided that life is too short. I am a breast cancer survivor and I lost both of my parents recently. So....I bought an Airstream today off of Craigslist.
I bought a '67 Globetrotter. It was used for publicity for a local company and is almost gutted (what is there, I don't want LOL!) So, you have a neighbor going thru something similar!
I'm hoping that the trailer will fit well enough in my driveway, at least for the summer. But, I'm curious to know where you are storing yours? is the storage space reasonable?
Thanks for any info!
|
|
|
05-11-2011, 12:41 AM
|
#8
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Wow Lisa! I'm glad you're taking such a positive outlook. I know what it's like to lose a parent, but I can't imagine both. However, I have determined that it is what made me as determined and driven as I am, especially at things like taking on and completing new projects.
I like your style. We actually looked at one similar to that, another 20' GT although I forget the year. Definitely one of my favorites. The one we saw had major frame issues or we would have jumped on it.
Anyway, That's pretty cool that you can actually fit it in your driveway. I'm in an apartment complex in South Redondo, off of Catalina Ave. You'll see the trailer down there every other weekend when we decide to bring it closer to home to work on. However, we use WESCO self storage in Torrance and it is pretty convenient. "Reasonable" is relative, and many things are reasonable to a guy who has slip payments to keep sailing his boat. However, rates are here . We went with them because of 24 hour passcode access, unlimited free electric, water, and pumpout, and the option of upgrading to indoor storage once the project is complete. There's a couple shiny toasters inside too.
Sorry about the lengthy response. I tend to do that.
Shoot me an email if you want any help with getting going on her. I really don't know much since I'm only a few weeks ahead in the renovation, but I've probably spent 150 hours + online reading information already. I'm officially obsessed.
|
|
|
05-25-2011, 01:42 PM
|
#9
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Stripped and Waiting
Haven't updated for a couple weeks... been busy trying to balance backpacking and camping trips with working on the trailer. However, we have finished stripping the trailer, and just have to do the door, hatch, and finish the locker. I am getting ready to take all the remaining interior pieces home and then we will blue-tape the lines for our furniture placement so that we can decide where to put the electrical and plumbing connections.
I started ordering my long list of items from VTS, Jestco, and RV supply stores.
This is the best image I have of our progress, taken through the rear screen.
On the personal story note, just got accepted into business school so now I've got some real deadlines to get this trailer done by or I'll start getting REALLY busy.
|
|
|
05-25-2011, 04:43 PM
|
#10
|
Rivet Master
1963 26' Overlander
Austin
, Texas
Join Date: Feb 2008
Posts: 2,640
|
Quote:
Originally Posted by worldinchaos
Anyway, we are now brainstorming on what to cover it with. Always trying to look on the positive side, at least we don't have to strip that whole section!!!.
|
Well, you could cover it with aluminum like Frank and others have done:
Or you could cover it with wood like Carlos and others have done:
Or, you could do something entirely different. Maybe install a velour headliner with fuzzy dice and curb feelers?
Good luck!
-Marcus
|
|
|
05-25-2011, 06:18 PM
|
#11
|
"Cloudsplitter"
2003 25' Classic
Houstatlantavegas
, Malebolgia
Join Date: Jun 2007
Posts: 19,977
|
You will be installing a new axle.....right?
__________________
"You don't know where you've been until you leave, enjoy life" RLC
|
|
|
05-25-2011, 06:49 PM
|
#12
|
Rivet Master
1963 26' Overlander
Austin
, Texas
Join Date: Feb 2008
Posts: 2,640
|
Does 59 have torsion or sprung?
|
|
|
05-25-2011, 07:44 PM
|
#13
|
"Cloudsplitter"
2003 25' Classic
Houstatlantavegas
, Malebolgia
Join Date: Jun 2007
Posts: 19,977
|
Quote:
Originally Posted by utee94
Does 59 have torsion or sprung?
|
Spring and solid axle I believe...looks pretty low though.
__________________
"You don't know where you've been until you leave, enjoy life" RLC
|
|
|
05-25-2011, 09:57 PM
|
#14
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Quote:
Originally Posted by utee94
Well, you could cover it with aluminum like Frank and others have done:
Or you could cover it with wood like Carlos and others have done:
Or, you could do something entirely different. Maybe install a velour headliner with fuzzy dice and curb feelers?
Good luck!
-Marcus
|
Yeah out of the options we have been looking at either an aluminum panelling or some kind of headliner, although not velour. It works well since the rear of the trailer will have a dedicated bed, no pull-out, so we can give it a "warmer" atmosphere. The easiest option we have discussed is some sort of textured fabric, but I also don't want anything that will hold dust as we go to many dusty places.
I'm leaning towards the aluminum, but its just daunting since it's "discovery" work.
Quote:
Originally Posted by ROBERT CROSS
Spring and solid axle I believe...looks pretty low though.
|
Leaf springs + drop axle. Been checked out by specialist mechanics, and no concerns. That being said, I am likely going to change it out at Inland for a completely new assembly with no drop. I would rather have the clearance for the off-road trails that it will eventually hit.
|
|
|
05-26-2011, 12:27 AM
|
#15
|
1 Rivet Member
1967 20' Globetrotter
Manhattan Beach
, California
Join Date: May 2011
Posts: 19
|
Quote:
Originally Posted by worldinchaos
On the personal story note, just got accepted into business school so now I've got some real deadlines to get this trailer done by or I'll start getting REALLY busy.
|
Congrats!!! did you get into UCLA?
Way to go on the trailer! it looks great! Mine is sitting in my driveway and NOTHING has happened....well, other than my kids sleeping in it on weekends LOL!
|
|
|
05-26-2011, 05:12 AM
|
#16
|
"Cloudsplitter"
2003 25' Classic
Houstatlantavegas
, Malebolgia
Join Date: Jun 2007
Posts: 19,977
|
Quote:
Originally Posted by worldinchaos
Leaf springs + drop axle. Been checked out by specialist mechanics, and no concerns. That being said, I am likely going to change it out at Inland for a completely new assembly with no drop. I would rather have the clearance for the off-road trails that it will eventually hit.
|
Give Andy kudos from all here.
Drop axle? Interesting choice, wonder when that was done. Could be that the axle was flipped at some point.
Sweet Streams.
__________________
"You don't know where you've been until you leave, enjoy life" RLC
|
|
|
05-26-2011, 08:37 AM
|
#17
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Quote:
Originally Posted by ROBERT CROSS
Give Andy kudos from all here.
Drop axle? Interesting choice, wonder when that was done. Could be that the axle was flipped at some point.
Sweet Streams.
|
Who knows... May have also been an original part from an earlier model. From what I remember, my drop looks identical to Steve's 53' Flying Cloud. I'm guessing it's another instance of Pacer's using up leftover production materials from the assembly lines.
|
|
|
05-26-2011, 05:24 PM
|
#18
|
Vintage Kin
Fort Worth
, Texas
Join Date: Nov 2006
Posts: 8,014
|
I'd like to suggest the thought of having it ready to roll prior to the interior work proceeding much beyond demolition/stripping. That is, brakes, axles, tires, signal lamps, hitch rigging equipment, etc. Breakaway switch, house batteries, etc. The aluminum tent. I know these all fit in "the plan" at some logical point, but the attempt to be persuasive, here, is the option of using the trailer really, really soon. Versus a year or more. Now, having stuck my neck way out, it's a fine thread, a nice trailer, and I admire the NP visit goal. These trailers are all too fun to work on, by themselves, and the weekends fly by is the thought . . the reality. The road performance/safety details take more time than is apparent. When out of the way that trailer is a whole other creature.
|
|
|
05-26-2011, 07:03 PM
|
#19
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Quote:
Originally Posted by REDNAX
I'd like to suggest the thought of having it ready to roll prior to the interior work proceeding much beyond demolition/stripping. That is, brakes, axles, tires, signal lamps, hitch rigging equipment, etc. Breakaway switch, house batteries, etc. The aluminum tent. I know these all fit in "the plan" at some logical point, but the attempt to be persuasive, here, is the option of using the trailer really, really soon. Versus a year or more. Now, having stuck my neck way out, it's a fine thread, a nice trailer, and I admire the NP visit goal. These trailers are all too fun to work on, by themselves, and the weekends fly by is the thought . . the reality. The road performance/safety details take more time than is apparent. When out of the way that trailer is a whole other creature.
|
I guess I'd say that this is the direction we are heading, but not 100%. First off, we are going to continue to go to NP's, camping, backpacking, etc, even without the trailer. In fact, we have been on those trips two of the last three weekends, and are going to Catalina Island both of the next two weekends.
The first thing I have really completed is getting the tow vehicle ready with some upgraded gauge trailer wiring, suspension changes, auxiliary fuse box, and upcoming is the brake controller. On the trailer side, we do plan to have all the lights, running gear, hitch, and safety items ready by the time the subfloor is getting installed. We aren't doing it any sooner because we are going to run new wiring for the signal lamps and possibly brakes depending on what we find. Also, I don't want to move the trailer around until I see what the full frame looks like.
But I believe that's approximately what you are talking about. We may use it as an aluminum tent...
|
|
|
05-30-2011, 11:37 PM
|
#20
|
Rivet Master
1959 17' Pacer
Long Beach
, California
Join Date: Mar 2011
Posts: 920
|
Quote:
Originally Posted by lisamomof2
Congrats!!! did you get into UCLA?
Way to go on the trailer! it looks great! Mine is sitting in my driveway and NOTHING has happened....well, other than my kids sleeping in it on weekends LOL!
|
Yep, UCLA and USC. Not gonna get into the rivalry debate on this site, but I'm still undecided at the moment.
As for the trailer, we spent a while there today doing a variety of tasks starting with lots of measurements and planning of where we will need all our electrical connections.
Our Jestco kit arrived, so we hopped on over to Harbor Freight to grab a polisher and did a quick test of the gray bar on a small area (hence the picture with reflections). Worked out better than we hoped.
We also replaced our broken Bargman L-77 handle stub on the trailer with a fabulous design from TG Twinkie, and it looks amazing.
Then we got into pulling down some interior panels so we can put the shell away and work on the insulation, wiring, and plumbing. As you can see, someone has been there before us with Killroy, and we also discovered one panel was replaced. The hardest part of the day was removing the old water heater vents which were attached with a combination of screws, rivets, and 3 types of NAILS.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|