Rivets- How to replace
Posted 06-23-2008 at 03:01 PM by rrbrinkley
I know there has to be info on this site with regards to properly replacing rives/vista windows. Where do I get the tools,rivets, etc. I need to pull the vistas and clean, re-vulkem, soon. Thanks to all.
Total Comments 4
Comments
-
Airstream intalled the vista widows differently for different years. I have a 73 and I was able to remove it using a screw driver, needle nose pliers, and a utility knife.
Tools is one of those things I have already had when I started on my airstream. So I will cover the tools you might not have. Hand held grinder with a cutting wheel, Dremel, Air compressor rivet gun, Drill and 1/8th replacement drill bits, sealant gun, and I bought a set of hemostats to hold wires out of the frame so they would not slide back into the trailer skins.
BrianPosted 06-24-2008 at 08:32 AM by Lothlorian 
-
Rivets- How to replace
Great !! Does anyone know of a "How to" on this ? Also, if my windows have that white crud in between them,(AND BUBBLES) is there a way to treat them so they will remain clear after the re-install ?Posted 06-24-2008 at 01:54 PM by rrbrinkley -
rrbrinkley
I know thats been covered in a thread somewhere on this site. U can also ask ANDY @ Inland RV. U can pm him here.
Maybe U are not using the proper key word for the searchPosted 07-05-2008 at 08:10 PM by Mikethefixit - We need help replacing both our holding tanks on our '73 Excella-which is in great shape otherwise-Helpless in Pa.tessagirl21
Posted 05-06-2009 at 01:17 PM by tessagirl21
