12 Volt Distribution Upgrade
Posted 10-03-2008 at 10:48 PM by nd48463
I finished the upgrade of the 12 volt system. Much cleaner, and all 12 volt works now!
Total Comments 7
Comments
-
Posted 10-12-2008 at 07:13 AM by jamesardis
-
The glass fuses are still there for the trailer towing lights. I could not find the blde style fuse holder locally so I picked up the glass holder at radio shack to get us by for the weekend trip. I also installed main (water tight)fuses right off of the battery in the battery compartment. Now that the season is over, it is time to begin floor repairs!
NatePosted 10-16-2008 at 06:40 PM by nd48463
-
You must have exercised each circuit so let me ask you this? What is circuit 5, 6, 7, 8, and I think 9 which is listed in the manual? Don't have manual in front of me, so guessing on the numbers? I get it- the towing circuits.Posted 10-20-2008 at 07:58 AM by ambassadorT
-
Posted 10-26-2008 at 07:16 PM by nd48463
-
I've learned a lot and I've ordered some parts and replaced the old with new. But I have a question.
The fuse block with 9 positions has only 4 holes for the negative.(bought from best Rv if anybody cares). I have 8 wires. Can't double up because the holes are to small or the wires are to big.
Any suggestions?Posted 11-10-2008 at 06:45 PM by ambassadorT
-
Posted 11-20-2008 at 07:25 AM by flyfshr
-
Does anyone have a picture or diagram of the old style?
I have a 1983 Limited. Some of the lights blow a fuse.
I think a previous owner relocated some of the wires.Posted 11-24-2008 at 04:21 PM by Andy K




