Join us as we rebuild our 1962 22" Flying Cloud in preparation for our cross-country tour.
Custom Aluminum Replacement Roof Vent for Our 62 Flying Cloud
Posted 02-24-2009 at 07:32 PM by FLYNCLD
We just finished installing a new custom made roof vent to replace the original fiberglass vent which was in very poor shape. We were not able to find anything that looked close to the original, and look way cool as well, so we fabricated this one. As there were several holes in the roof where the PO's had moved vents around at one time or another, we made the base plate large enough to cover all the various holes that had been cut in the roof over the years. Many hours and many rivets later the results are quite pleasing!
Tags: roof vent
Total Comments 6
Comments
-
Wow looks great! You could start a small business so handy and great looking!Posted 02-26-2009 at 09:05 PM by gail 
-
Thanks!
Rather proud of it ourselves!
Posted 02-26-2009 at 09:31 PM by FLYNCLD 
-
Very nice
Posted 02-26-2009 at 11:46 PM by JDL -
awesome!Posted 03-01-2009 at 03:19 PM by dreadydreame -
Looks fantastic! Good job!Posted 06-20-2009 at 12:28 PM by 76sovereign -
Flyncld - Any progress or thought given to making a few of those vents for those of us who are way too challenged to take on such a project? I sure like what you've done, and would need 2 of them!!
Thanks - JimPosted 10-10-2009 at 05:05 PM by whitsend
