[jaco]

Craig I have wondered the same thing about the insert trim from Inland.
Actuallly I intend to see if a "lipless" trim will slide in and hold and look good where the #71411-Andy trim is now.
You can see in his picture that the 71411 has a very slight step-down along the side. That step "3D's" the center of the insert out for a nicer appearance which fills the extrusion channel. I am curious how a flat piece of either veneer tape or a cut of laminate would look in those extruded channels. If they would work there's lots of color could be added for accent.

BTW there are a few places along the kitchen overhead cabs where the beige/off white trim insert is a flat piece(lipless) of cut laminate. But those extruded channels are different. I think the trim (beige) on my front curtain valances is the same #71411.

It would be wise to pay a couple bucks and order a 6 inch piece from Inland Andy . If he would waive the shipping and handling or minimum charge( it would fit in an envelope). If there is too much doubt.
However I think 71411 is what is in my 74 Excella. I'm just tired of the color.