|
I think this has been a bad idea. I do not think i will ever be able to paint all surfaces of the tubes and I have destroyed the fiberglass insulation surrounding them. So i have probably done more harm than good. I guess i will just cram the insulation back in as good as I can.
I Noticed that someone has cut of the shroud/hood that would have directed the air from the lower outside vent to the vent on the top. There is also nothing on the top of the flu for the gas flame to direct it to the top vent. This means the only thing keeping CO from collecting inside it the natural ventilation and the wood trim. Is there supposed to be a chimney/ duct from the flu to the top? I have a CO sensor mounted directly above the fridge and it has never gone off but I still think I need to do something else.
|