|
Okay so I have the Univolt out. Here is the picture, I've already started disconnecting things and am thinking about how I want to mount the Intellipower. I was originally thinking I would mount the fan out the back, but that will require removing the back wall. I may turn it sideways, facing the heat sink fins toward the fuse panel and cut a hole in the side for the fan and power cord.
My issue is, which of these wires are the positive and negative that need to go into the Intellipower. The big wire across the top goes to the fuse bus. The fuse panel is on the left in the picture and the dead weight of the Univolt is on the right.
Thank you!!!
__________________ Mark 
72 Sovereign: L couch, mid-twin, rear-bath "When you come to a fork in the road, take it" "It was impossible to get a conversation going; everybody was talking too much." "If you don't know where you are going, you will wind up somewhere else." - Yogi Berra
|