View Single Post
Old 06-29-2009, 07:41 AM   #7
DanB
4 Rivet Member

 
DanB's Avatar
Profile:  1970 23' Safari
Lorain , Ohio
Posts: 384

Quote:
Originally Posted by LI Pets View Post
That's ok if you never go on the road, but if that's not the case, it will turn in powder from the movement and vibration.

You may want to do some more research.
This is a real question.....

Really? (re: "it will turn in powder from the movement and vibration")

Do we really know this and has it been tested or photographed? Or is this an Airstream urban legend?

What is refrigerated semitrailers insulated with? Seems there has to be something out there that would work.

I would think if 4" think panels were adhered to the underside of the plywood, the only "movement" would occur from the steel frames rubbing against the sides. And then, the "rubbing" would stop as soon as a gap was created.

Am I correct that the factory doesn't use batts in the belly?
__________________
DanB
________________________________
Always Looking for Pinball Machines!
DanB is offline   Reply With Quote