Quote:
Originally Posted by azflycaster  Looks like you are off to a great start. You might want to think about a few other upgrades while you have everything apart. I would replace the Univolt with a modern 3 stage converter. I recently installed an Intelipower 9245 in my trailer and I am very pleased with the new unit.
I would also take a good look at your copper water lines and think about replacing them with PEX. It looks like you have at least one patched area, most likely from a freeze, there could be more. You will never have a better time then now to make the swap to PEX. |
Good thought on the PEX. I am most likely going to replace all the water line and the gas lines as well. I would just feel at ease that I would have a better chance to not have a leak... All of the sub-floor is getting coated with epoxy paint on the bottom before being screwed down then the top will get it as well. I have been reading quite a bit over the last week and i will paint all the edges of the floor as well. it wont rot again in my lifetime...