Thread: BobB
View Single Post
Old 05-21-2009, 11:18 AM   #2
Silverhobby
Rivet Master

 
Silverhobby's Avatar
Profile:  1956 26' Cruiser/Overlander
1957 26' Overlander
1962 22' Flying Cloud
Vale , North Carolina
Posts: 1,091

Send a message via Yahoo to Silverhobby
Any jack will work that is rated for the weight it is lifting. A floor jack will be a bit easier to get under the jack point if there is a flat. Be sure to use the jack points that are labeled on the under belly. Otherwise, you will damage the metal underneath the trailer. The BAL stabilizers under your trailer are not to be used to lift the trailer. As the name implies, they are for stabilization.
__________________
Kevin with Baity the Lab/Pointer
//------AIR # 7303------\\
WBCCI 17109
visit my restoration blog at:
Silverhobby is offline   Reply With Quote