[Inland RV Center, In]

Originally Posted by jeffsmattson

Ok. So the mounting bracket that comes with the new axle will be shaped like an L so the frame will sit in the "chair" of the L.

The old bracket was in the shape of an upside down reversed L. (if that makes any sense to you)

If the new axle is the same as the old one, the frame will sit on top of the short part of the L. Leaving very little to weld.

I am sure that you have all this figuered out. I just want to know what I need to have here to get the job done.

Your good to go.

Andy