|
Looking at the diagram I think it would be failrly easy to fabricate the bunks on your own. If I was doing it I'd use aluminum angle iron to save weight (can be a pain to weld though). If you can get the bunk hinges then you can probably find a hinge at your local home depot for the back wall. Personaly, I'd forego the ceiling straps and build two support feet, one for each outside corner. It would give you more strength in the bunk and if you made a way to attach it to the lower bunk you could probalby sleep an adult up there if you really wanted to. Neat setup, especialy for a family since AS isn't really good at family friendly floor plans.
|