|
Yes you can! I did it. Mine was even worse in 3 separate pieces. Here's what I did although labor intensive:
1.I took out the counter which by the way was PBS plastic
2. Cut out a piece of plywood to fit under and inside the counter.
3. Put a layer of fiberglass matting and epoxy resin on top of the plywood
4. Glue, screw and clamp the counter to the plywood epoxy sandwich including countersunk screws through the countertop.
5. Bondo the surface
6. Paint with 2 part epoxy
__________________
Pay no attention to the man behind the curtain- WoZ
|