Quote:
|
Originally Posted by utee94
So a pertinent question is, how do you check the frame for rust if you can't see it?
With the belly pan intact (and I'm told it is), how can you know?
|
- Climb on the rear bumper and jump up and down to get a feel for how "loose" the frame is.
- take along a cordless drill, some pop rivets and a flash light. You should be able to remove a few Alum rivets and pull down a small part of the pan in the rear. The last 4-8ft is the most likely area to be badly rusted. You can replace the rivets when you are done.
From the looks of the pictures... I'll lower my earlier max price to $2200.
