Quote:
|
Originally Posted by finalcutjoe
..Is it possible to (easily) configure this hitch to be swappable between to trucks?...
|
the hitch STAYS attached to the trailer, not tv....
so if the receiver height is the same and you went with the 1400lbs w/d bars...
the only adjustment between the 2 towing units is jack tension....more for the sub, less for the ram.
there are other minor details that have been covered elsewhere, like the potential of needed 2 different stingers...
see posts #407-409 on this issue.
INSTALLATION is covered well with photos by jim clark earlier in the thread...
the ultimate haha users guide...
on the sub side, the stock receiver is INADEQUATE for a 30/slide tongue mass, and should be upgraded to class 5 capacity.
cheers
2air'
on other related note, the a/s site no longer shows the 30/slide unit,
HAVE THEY DROPPED THIS MODEL for the coming year?