[InsideOut]

We had hoped to get the frame welded sooner, so we could paint it before winter hit...thus be able to get the floor in and work throughout the winter. Didn't happen. So we had to wait for a day on a weekend to hit 50+ degrees so we could paint the frame. Finally, the end of February - even though there was snow still on the ground, we had a weekend of nice weather where we could but a propane heater inside the trailer and bring the tempurature up high enough to paint...which we did. Two coats of POR-15...did I mention we are doing a shell on floor replacement? Once the floor is in place and the shell re-attached, we will be dropping the belly pan to paint the underside of the frame.