Quote:
Originally posted by 74Argosy24MH
You put a lot of thought into upgrading the floor and how to make this last well into your kid's lives, I wouldn't give them a 60 year old furnace to deal with. The new one will need holes through the side of the trailer for inlet and exhaust, when you replace the floor you can loose the original hole. If it needs heavier wiring now is the best time to run it. The replacement I got is only about 10" tall and will also go under the stove. With the cabinetry out it will be easy to see where ducts can run. When I started mine I figured it was time to replace all the original appliances because it would never be easier to reroute gas lines, water and electric to fit.
John |
Do you have a link to the brand you have and some installed pictures?
My concern is having to modify the face of the cabinet. The side I don't mind if I can mount it sideways. All the current units I have run accros look like they need to be mounted perpendicular to the outside wall. I already have two holes in the side from the existing unit. The hope would be that I could reuse those vents with some creative duct work.