|
I finally yanked the toilet, or what left of it from the trailer.
Since the toilet is mounted under the bathroom molded bench, it has to be installed thru the 12" door in the back. Seems that for that reason the base of the toilet is made of two halves, so it can be inserted in parts and put together.
Too bad they used bad aluminum cast. The porcelain, plastic main valve and brass water valves are in good condition. Even discovered all brass vacuum breaker mounted under the sink.
That is quite disappointment to see all quality trailer having so important part just disintegrating.
I took a look at new marine toilets that have hand pumps, or expensive macerators. Will have to go to Camping Word and take a look at theirs. The trick is to find the toilet that is rounded, so it would not stick past the mold and having the top with a flange so it would seal on the original bench. I will have to cut bigger hole in the bench and have the new rim stick above it.
Tomorrow I am picking up new check valves for the original ($450 now) water pump. Wish me luck.
|