|
Flash, Check out a good local lumber yard for 1/4" Oak plywood. I've found some very nice oak at Shur-Way Lumber here in Vancouver that is nearly a perfect match for the original material. If your original is the natural color with lacquer finish, you won't even have to stain the new material, just a couple coats of semi-gloss varnish will match nicely. If you're intent on re-gluing the old stuff, use saran-wrap between the plywood and the clamping fixture. Ordinary white wood glue works fine. You can either scrape or sand the excess glue off before varnishing. Darol
|