[Pahaska]

The cork that I ordered comes only in case lots of 11 1' x 2' tiles. In order to determine whether 2 cases would cover the area, I measured the trailer and made a CAD image of the floor plan.

I laid out a tile at a reasonable starting point and then used the stamp function of the program to place additional tiles as needed to cover the whole area. Where the tiles extended out of the area, I could see what portion of the tile could be used elsewhere. I required that all joints must be factory edges.

I then went back and started numbering the tiles. The odd shape of the floor requires a lot of tile cutting. Part tiles are numbered 1a, 1b, etc.

I made 3 layouts using different starting alignments. In all 3 layouts, the 2 cases of cork will cover the area. What I did find out that one of the layouts involves much less tile cutting and fitting than the other two.