Hi finalcutjoe -- You didn't say what your WD setup was. I think you'd also get some informed comments if you post the pound rating of your current WD bars. A discussion of some of the points is at
http://www.airforums.com/forums/f464...5-a-33454.html.
Here's a good aid to check how well your WD is working. Write down the height to the top of all four wheel enclosures on your tow vehicle (or some easy to measure point on the body near each wheel). Now hitch up, engage the WD gear the way you have been and remeasure to the same points. All four should decrease by close to the same amount. If you're down by the rear axle something does have to be reworked. Please post more info and we'll see who can offer advice.
