|
just thought I'd give an update. I used the Dap caulk remover and it worked, well in two places it worked too well and actually softened the plastic some, but nothing a little resin and a careful sand tomorrow won't fix. I continued to clean caulk today for 6 hours. Mind you just in the bathroom I filled a plastic grocery bag FULL of caulk today and I was only working on half the bathroom (I took out two bags yesterday). I think the back of the trailer is higher with all the weight out. I still feel there is a chance there is some left too thin to see. Tomorrow I'm going to clean the whole area with rubbing alchohol (not the more fun type) and put on the tile doc. I'll post pics at the end of the weekend when I get a chance to bolt some things back in. At this point I think any place that could possibly have caulking residue on it would be covered with new caulking anyway. Thanks for all the tips. On a unrelated note, also borrowed on suction cup and was able to pull the one dent out of the street side rear corner, came out perfect. Lets hope the paint goes on that successful.
|