View Single Post
Old 07-04-2007, 11:20 AM   #6
TomW
Rivet Master

 
TomW's Avatar
Profile:  1967 26' Overlander
Huntsville , Alabama
Posts: 2,480

Quote:
Originally Posted by Zeppelinium
... Note the big red arrow! ... I thought it was a cross member, but it turned out to be a galvanized enclosure for the black tank. ... the bad side it that it's the full height of the space, so there is no space between the belly skin and the bottom of the enclosure, making it impossible to rivet the skin back together
The black tank is supported/protected by an inch or two of styrofoam on its bottom & sides. It is possible to safely drill a rivet hole in the galvanized metal.

Tom
TomW is offline   Reply With Quote