| Airstream wiring etc.....
WD40 will drive out moisture and disolve any corrosion....say electrolysis. This is an action where as two dissimilar metals react to each other. Some metals are active and others are passive. Bet you wanted to know that>>>>.hahaha
OK, from the beginning....Disconnect the battery or batteries and isolate the positive cable. Isolate.....wrap with nonconductive material so as to not allow any passing of electrons.....
Check to see is anything works...Connect to shore power. Converter should hummmmmmmmm..
Use multimeter on volt scale to measure converter volt output..... Should be about 14volts. Spray every wire end, connection and fuse. Turn each fuse at least 1/2 turn at it's location. Measure or test every fuse on each end to find any/all voltage. Check to see what works and what does not work......All fuses are at same location........near converter. Look at converter and learn max amps output as in 30, 40, 070, or ???
__________________
Visit Idaho The people are great
|