Quote:
|
Originally Posted by markdoane I think you could go one of three ways on this.
1. Use a heavy vinyl to cover one side of the plywood. This is the way the original was done.
2. Coat the wet side with exterior Spar Urethane. Or even epoxy resin.
3. Buy a sheet of shower liner fiberglass panel. That's the white pebbly stuff you see at Home Depot. Problem with this is you will need to get wall channel that is thicker, or rabbet the plywood side so that both fit into the wall channel. The channel is less than 1/4".
Good luck with whatever you decide. I think the vinyl on mine is ok and I am going to leave it the way it was. |
You mentioned wall channel, do they make wider channel and who carries it?