View Single Post
Old 11-08-2006, 04:23 PM   #4
uwe
418

 
uwe's Avatar
Profile:  1963 26' Overlander
1958 22' Flying Cloud
1963 19' Globetrotter
Portola Hills , California
Posts: 4,732

Send a message via Skype™ to uwe
Quote:
Originally Posted by Chaplain Kent
I found this wonderful car dolly to tow behind Chummy with my wife's Mazda 626 on top. The car dolly was perfect, needed no work, even the surge brakes worked well. My problem is that the car does not have the clearance to drive over the frame on the dolly. Granted this is a low car but there has to be a way to get it on the dolly. Any suggestions?
Could there be a top secret little pin somewhere that unlocks the Dolly's ramps to lower down more? We had one of those for a while, where one would pull a pin and the dolly would hinge backwards to receive the car's front wheels, and then clunk into place forward when the car went on top of it, to be locked in place with a pin for travelling.
You might be careful when taking tight turns with it. Ours had a tendency to rub it's fenders on the car's rocker panel during tight turns.
__________________
Uwe
www.area63productions.com
uwe is offline   Reply With Quote