Thread: Galley Puzzle
View Single Post
Old 10-01-2006, 05:39 PM   #1
Cat
4 Rivet Member

 
Cat's Avatar
Profile:  Mukilteo , Washington
Posts: 405

Send a message via Yahoo to Cat
Galley "End Wall"

I am just about to TEAR MY HAIR OUT!

This is a 1981 Excella

I had the end 'wall' next to the range---at the end of the galley---removed, and with all the new pieces (one guy threw out the original pieces to be used for templates---& I'm past that now...thank goodness---but unfortunately, it was too long ago and now too much has been forgotten...& with the new pieces I can't figure out the puzzle.

Can anyone help me figure out why theirs a 3/4 inch wood piece that won't fit between the stove and the outside panel?

I have photos---but the Forum's uploading feature isn't working. If you can help...and you need to email me plz do at chernbear@yahoo.com, or phone me at 425-328-7100.

I just need someone who knows why this 3/4" piece that HAS to go between those two areas fits at the top, but not at the bottom; AT THE BOTTOM THERE IS NO SPACE for it! There is a 'track' on the floor to slide the panel in (ok...I've done that), and once it's in the track, that 3/4" piece that HAS to go between that panel and the countertop, will NOT fit all the way down. It fits at the top...but not at the bottom; it's like it needs a WEDGE piece...but I SAW this before it was tossed, beFORE it was replaced and the old one was identical to the one I have.

It's the short wall to your left that has the "magazine rack" under the flip-out countertop 'extender'... as you enter the coach.

One picture shows this 3/4" piece that slips behind the panel (but, you'll see when the panel is in the 'floor track', that 3/4" piece causes the panel to bow out...and that's not right! Another photo shows how the 3/4" piece fits perfectly with the panel as both were cut to their respective templates.

THE PHOTOS SHOW THEY'VE BEEN UPLOADED (2 OF THEM)...BUT i DON'T SEE ANYTHING. ???

SO WHY CAN'T IT FIT ALL THE WAY TO THE FLOOR? When we try to do that, the panel will not go into the track on the floor. You can see in one photo what happens when we try---it pushes it out so it won't go into the track at that end. My tow-guy will be here in 10 days, and I need this done before he gets here...and my son isn't always available....so someone please PLEASE HELP ME.
Attached Thumbnails
Click image for larger version

Name:	GalleyEndWall-5.JPG
Views:	23
Size:	81.2 KB
ID:	26469   Click image for larger version

Name:	GalleyENDwall-2.JPG
Views:	30
Size:	68.9 KB
ID:	26470  

__________________
*Cat's Vardo "Bear" (1981-32ft.Excella)
http://autos.groups.yahoo.com/group/RoyalTrailerTrash[/u] to meet good people in good Parks[/i]
Cat is offline   Reply With Quote