View Single Post
Old 07-14-2006, 11:23 AM   #8
2airishuman
Rivet Master

2airishuman's Avatar
Profile: 
Posts: 5,535

hi b cup and other haha users......

my understand is, a small amount of downward tilt at the front is normal/common. this is after fully linked and with the w/d bars tightened....
and also assumes your reciever isn't loose or improperly installed on the tv...

while it does depend somewhat on stinger drop length, it is also related to the position setting on the strut bars and the hole openings showing on the spring bar links at the lower end of the spring bar jacks....

of course what matters most is that the trailer is prettly level front2back and that a cat scales visit shows proper axle loads on the tv...if those 2 issues are correct downward till will be small but visible....

cheers
2air'
__________________
all of the true things that i am about to tell you are shameless lies. l.b.johnson

we are here on earth to fart around. don't let anybody tell you any different. k.v.
2airishuman is offline   Reply With Quote