|
If you are referring to the inside dome area liner- and itsa like my 82, it is ABS just like the cabinet surrounds that are cracked in mine. I have a small crack in that area too, and filled it with a caulk that is flexible and has little specks in it so it blended in. That area looks ok, unless you look real close. The caulk was a home depot item, easy to find. It looked decent on the other cracks for awhile, then re-cracked from the cold weather.
My cabinet areas are cracked either near the lights ( the reading lights), and in one seam like area between the galley and living area. I hope to try the plastic weld, but i found a plastic epoxy repair at walmart this afternoon that looks promising. I will try it, but I bet the crack will be too wide without some filler besides the epoxy stuff. Its called "plastic weld".
The removal of the panel would be the right way to fix it, so i might hold out until i get the plastic weld sticks and use my soldering iron.
By the way Peter removed his dome in the front and said it took at least two guys to put it back in place.
|