[Sav'h Steve]

Your plastic welding got me thinking of the cracks on the front and rear top interior rounded panels. I'm not sure if it is fiberglass.

On the front near the speakers are some stress cracks that are about a foot long and separate about 1/16 to 1/8 inch at most.

There is not enough play to get a backing up in there to increase the glueing surface area - although that was / is my best thought. I also thought about drilling a small round *stop* hole at the end of each crack. Also just thought of "living with them".

Any of you had a successful experience with this?

Steve