| Bugs out
I replaced several screens last year. No problem. Just remove the round rubber strip holding the screens. Reuse the same strip. There is a special tool that is handy. It is available at home stores. It is plastic and looks like a pizza cutter with a round wheel on each end. One wheel is used to place the strip in the groove and the other end is used to push it finally down into the groove. Rough cut the screen to size and insert the strip and use the tool for final installation. Last, with a sharp knife, trim the screen on the outside of the strip. Look at the old screen to see what the final results should look like.
Good Luck
Dan in Tennessee
|