[outofcontrol]

Well, the little 40x40mm plug in guys just don't cut it. The first picture is a side by side comparison. They work, and you could probably center them better, but the big ones are just about perfect.

I don't think the lens is supposed to come off, but this is a test, so it had to be done. I'll have to return all the little ones I bought, and buy 3 more of the big ones. I took some wire and made sure it wouldn't move around, and stay centered. I also trimmed the housing a little to make it fit up flush with the old lens.

When you take off the lens, the circuit board and all the LEDs are still buried in a thick pool of epoxy. it's hard to see in the pictures, but I am 100% sure it's totally waterproof, and still sealed.

I'm going to see if I can find some new gaskets for the lenses, but these housings are pretty non-water proof anyway.

So they're $25 a piece, plus the $3 pig-tail wiring connector, but once you see them lit up, there's no way to can go back.

-Kevin