| Clearcoat removed?
On my 65, I had to remove the clearcoat first. Then use the magic elixer. I used a ICI / Devoe paints 502-t stripper. Once the clearcoat is off, take some Diamond brite and put a little on your buffer pad. Rub it in to the aluminum a little before hitting it with the electric, then buff a 6x6 area and keep buffing until all the polish is gone. Make sure the buffer is at a low (not high / fast) speed. It works fast. Keep me posted.
Rob
__________________
Rob, Zoe', Stanton, Bryce and Braedon Baker
Past President WDCU
Do you Listen to the www.theVAP.com
Plymouth, NY 13832 WBCCI #2820
Courtesy parking
|