Hey Gang,
Since owning my trailer, I have NEVER been able to get the trailer brakes to lock-up. They stop ok, but I don't trust them for a panic stop. Because of this, I always leave plenty of room to stop.
This situation has occured when using the Reese Brakeman and the Jordan Ultima. We just installed the Jordan yesterday and couldn't get the brakes to lock-up. I called Jordan and everything sounds right. I'm getting 13A, which means the controller is reading all 4 brakes. It does slow down great, no jerky feeling, but just won't lock-up. I'm returning it today so Jordan can bench test it.
Note: it's wired the off the battery using a 20A auto-reset CB. We even ran an additional ground wire. Adjusted the brakes until they stopped and then backed off until they were dragging slightly.
I replaced my brakes shoes earlier this yr. I used Red Line Trailer Parts- "trailer brake shoes/linings, fits Dexter, Fayette, Foreman 12"X2" electric brakes." The magnets looked great, wiring looked clean. I didn't turn the drums, as there was no scarring.
So if any of you have had this problem/experience or know a possible cure, Please share!!!! I'm needing help!!!
Many Thanks-John
p.s. I really don't want to get in to a discussion over brake controllers, as this is already being explored in another thread. I'm just looking for help in the no lock-up situation
!