Thread: Fold out table
View Single Post
Old 03-10-2006, 08:33 PM   #3
davidz71
Rivet Master

 
davidz71's Avatar
Profile:  1986 25' Sovereign
Southern Middle , Tennessee
Posts: 3,038

If I fold the leg underneath, what keeps the leg from pulling away from the table and hitting the inside wall of the trailer? Also, what keeps the inside tube from pulling out and hitting the floor once the table is folded up? I see that there is some type of nylon piece farther back underneath the trailer that might be tightened up but am not sure. My '77 Excella had a wire loop you pulled to unlock the aluminum frame so that you could pull it out and unfold the other table leaf.
__________________
Craig

AIR #0078
'01 2500hd ext. cab, 8.1 litre gas, 5 sp. Allison auto
3.73 rear end
Mag-Hytec rear diff cover
Amsoil Dual by-pass oil filtration system
Amsoil synthetics all around
265 watt AM Solar, Inc. system
davidz71 is offline   Reply With Quote