Quote: |
Originally Posted by bill benton Does your table wedge itself tight to the carpet when its closed. Both of the trailers I have had, the table wedged itself to the floor. I would think unnecessary swinging of the table would cause the screws to prematurely strip out. I have both a dinette and a swing up table in our as.. I've had more trouble with the dinette stripping the screws than the swing up table. My thought which ever keeps the table the most immobile would prevent this from happening again. | Carpeting has long since been removed and a parkay floor put in. The table swung freely from the top hinge but those were not the hinges I was having problems with. You are correct in that there was no support at the bottom because it was not resting on the parkay floor.
__________________
Craig
AIR #0078
'01 2500hd ext. cab, 8.1 litre gas, 5 sp. Allison auto
3.73 rear end
Mag-Hytec rear diff cover
Amsoil Dual by-pass oil filtration system
Amsoil synthetics all around
265 watt AM Solar, Inc. system
|