|
Hensley Help
I welded a magnet on the end of 2 pieces of 36-inch threaded rod. On top of each rod I put a piece of red tape as a flag. One rod goes on the 'stinger' and the other on the Hensley. When backing up, just line up the two flags. When the 'stinger' is close, get out and check the height and make up or down adustments with your jack. I usually hit it dead on the first shot. One other trick is that, once the 'stinger' is inserted, I leave my SUV in reverse while I complete the Hensley hookup - this puts a little pressure on the connection which makes locking the Hensley much easier.
-Mark
|