Wear protective gear (will melt plastic and burns skin):
-goggles
-resperator
-chemical resistant gloves
-you get the picture
We used about 2 gallons of JASCO bought at Home Depot.
Use a paint brush (you will go through a few) and brush in one direction only when applying.
Apply 2-3 coats (in the same direction as previous coats) in a 30 -40 minute time period.
It will start to bubble and then you can start pulling it off.
At a later time:
Once everything is off you can use Goof-Off on a terry-cloth buffer to get rid of any residue.
Feel free to e-mail us if you have any questions or have any advice for us.
Thanks,
Anna and Greg
