|
I looked through your pictures and noticed that the shell formers/ribs connect to the C-channel and not directly to a through bolt that runs through the frame. This is exactly like a trailer that I'm working on. The challenge is in having those bolts coming up through the frame in place prior to installing the shell and having them fixed so your can apply sufficient torque when tightening. Welding was just one option.
I used aircraft nuts with loc-tite on mine. I also took the opportunity to connect a ground wire on two of the bolts. One for the pigtail and one for the battery.
I really like the rear kitchen model with the cool louvered exterior panel.
You have a real gem!
|