|
Chilao--- I know exacty what you're talking about as our 04-16' CCD had the same flimsy leg. While the screws never pulled loose ours was bent a couple times when we accidently kicked it getting into the dinnet. You just have to be Very Carefull getting in and out. We don't have kids but am sure that would add to the worry of banging it . Another fix would be to glue a piece of thin paneling to the table bottom and screw the leg to it. That might require shortening the leg to relevel it. I had to shorten the leg on ours anyway as it was an inch to long from the factory. Our CCD had a TON of things like that that disipointed me. It took over a year of using and repairing these things before I was satisfied with it. Then--we traded for an 05 /25' classic. This trailer is almost letter perfect. The couple things it need were very minor. Oh Well!
Pieman
|