| fixing the antenna
Price,
My antenna was stuck in the down position. I put a ladder at a shallow angle with a towel underneath to avoid scratching the paint, and my wife braced the bottom of the ladder. You have to get the little cover off the top of the gearbox. This is not easy if the screws are tight and the antenna is in the down position. I had to use a drill on one side. When you get that off you will see that a horizontal pin has not dropped into the slot in the gearhead. If you move the gear it will drop in and you can raise and lower the antenna. Mine was just covered with dust. Try a good cleaning. I would do this before buying new gears.
Barbwire
|