[87MH]

Woo Woo - Bud Time!!!

On the 78 Sovereign, the water pump, water manifold, drain valves, and inlet piping is located under the street side closet, just inboard of the wheel well.

Installed the water pump and function tested ALL water systems - no leaks - all valves holding - as I write a Clorox solution is sanitizing the 50 gallon fresh water tank, and ALL of the piping......

This was a big step -

Also found out that NAPA still stocks an exact replacement for the original license plate holder assembly - NAPA part # 435W - 32 bucks.


Picture #1 - Original (as purchased) Water Inlet to Pump Area - the red hose was connected back to the suction standpipe for the pump - don't know what that was about.

Picture #2 - Original (as purchased) Water Manifold - I have no idea what was being accomplished in this area - the way it was hooked up (pump removed) the city water could not supply flow to the use areas.

Picture #3 - Flo-Sure pump installed - I picked this up about three years ago for use as a spare in the 345 - I recently found an ITT PAR 36800-1000 belt drive pump to install in the 345 - will keep the existing Flo-Sure now in the 345 as a spare.