 Try this
Andy,
Based on what you've said. My suggestion would be to check the screws at the top of each window.
At this point, I really don't believe you need to remove the windows completely as you described. Your unit is way too new for that, yet. IMHO
See if you can put some Vulkem in the holes and, reset the screws to effect a tight seal behind the screws. It's very possible that water is finding its way in through the screws.
Good luck to you.
ciao
BTW, Don't over tighten the screws as in many cases..there's not much behind them..KWIM?
Last edited by 74Argosy24MH; 11-06-2002 at 12:31 PM.
|