[87MH]

Finished the Battery Box installation yesterday. The total expenditure for the project was $100 in parts and 4 hours of my time. Today, painted the "A" frame and drilled two 3/8" holes through the front "C" channel to route the cables from the batt box, up through the front steel angle and "C" channel, and inside the wall to the fuse box.

First shot is of the box in place - Aluminum angle is secured to the trailer frame supports with four 1/4" SS Phillips head bolts with SS Nylock hex nuts.

Second shows the box placement forward of the front of the trailer and rearward of the LPG Bottles.

Third is a shot from underneath. The Aluminum the box sits on is two thicknesses of .040 Aluminum secured with 3/16" pop rivets to the 1/8" Aluminum angle. The battery itself is held down by a frame attached to two long 1/4" rods. The rods are secured to the Al angle with wing nuts.